Illustrative photo — same AkuBox as the BK4A
LiFePO4 battery
12.8 V / 290 Ah
AkuBox LiFePO₄ battery 12.8 V / 290 Ah / 3.6 kWh, 4× EVE LF280K-D6-01, side-mounted terminals. Bluetooth + CAN. JK BMS active balancer, handmade in the Czech Republic, 4-year warranty on cells.
- Energy
- 3.6 kWh
- Capacity
- 290 Ah
- Cycle life
- 8,000 cycles
- Cell warranty
- 4 years
Variants of this pack
Other voltage or capacity · AkuBox
What it's good for.
An enclosed 12 V battery for motorhomes, caravans, boats and small PV systems. The plastic box protects it from damage and from curious hands.
A BAKOM battery assembly with a nominal voltage of 12.8 V and a usable energy capacity of 3.6 kWh (290 Ah), built from four prismatic LiFePO₄ (lithium iron phosphate) cells, type EVE LF280K-D6-01 grade A, in a robust plastic AkuBox. A well-suited power source for PV systems, backup power, off-grid installations and mobile use wherever a reliable, maintenance-free battery with a long service life is needed.
Safe and optimal operation is handled by an advanced BMS control unit, which continuously monitors all operating parameters and automatically protects the battery against overvoltage (OVP), deep discharge (UVP), overcurrent (OCP), short circuit (SCP) and temperature extremes. An active balancer with a current of up to 2 A continuously equalises the voltage between cells, ensuring even use of the capacity and extending service life. All operating data is clearly presented in the BAKOM BMS mobile app via Bluetooth.
LiFePO₄ chemistry is one of the safest lithium technologies — it is resistant to thermal runaway and offers a high depth of discharge, stable operation and an exceptionally long service life of thousands of cycles while retaining capacity. To keep the battery in the best condition, we recommend using the capacity in the 10–100 % range and charging it to 100 % roughly once a month so that the state of charge (SOC) reads correctly.
The AkuBox version encloses the cells in a rigid plastic box with brass connection terminals (+/−) on the top lid and an ON/OFF switch with an LED status indicator. The closed housing protects the cells from physical damage and is also suitable for spaces accessible to unauthorised persons (unlike the open-frame version). The assembly can be supplied with side- or top-mounted terminals (T variant) to suit the installation space, and can optionally be extended with CAN communication with inverters (Victron, Growatt, GoodWe, Deye and others) or an external LCD display. Installation may only be carried out by a qualified person; the battery is covered by a warranty that applies provided the operating conditions are observed and there is no unauthorised tampering with the BMS.
This variant (BK36A-C): Communication: Bluetooth, CAN.
Technical specifications.
Values for the BK36A-C variant. The charge and discharge limits match the BMS settings the battery leaves the workshop with.
- Nominal voltage
- 12.8 V (4S)
- Capacity
- 290 Ah
- Energy
- 3.6 kWh
- Chemistry
- LiFePO₄ (lithium iron phosphate)
- Cells
- 4× EVE LF280K-D6-01
- BMS
- JK B2A8S20P
- Balancer
- active, 2 A
- Continuous current (charge and discharge)
- 150 A
- Peak current
- 200 A / 20 s
- Cycle life
- 8,000 cycles to 70% capacity
- Charging — temperature
- +1 to +55 °C
- Discharging — temperature
- −22 to +55 °C
- Charging: absorption / float
- 14.1 V / 13.8 V
- Discharge cut-off (recommended)
- 12.0–12.4 V
- Communication
- Bluetooth, CAN
- LCD display
- optional
- Build
- AkuBox
- Dimensions
- 36.5×19×25 cm
- Weight
- 25 kg
- Production
- handmade, Czech Republic
- Warranty
- 4 years on the cells
Energy = capacity × average discharge voltage (3.125 V per cell), i.e. the energy the battery delivers between the BMS limits. Cycle life is stated by the cell manufacturer for 25 °C; actual life depends on operating conditions. The 4-year warranty applies to the cells; the BMS and other electronics are covered as set out in the warranty certificate.
Ready to connect.
Each battery leaves the workshop with its BMS set up and after a final test. Every battery comes with a report of the measured cell capacity and a warranty certificate.
- Battery with the BMS configuredWe set the protections according to the battery type and the communication according to your inverter.
- Cell capacity reportMeasured capacity and internal resistance of each cell, and the result of the final test.
- Manual and warranty certificateWiring procedure, recommended inverter settings and warranty terms.
- Inverter cableIncluded with 48 and 51.2 V batteries with BMS+ according to the ordered configuration; for other batteries at extra cost.
- BAKOM BMS app and BAKOM CloudBattery status and cell voltages on your phone via Bluetooth, history and settings on the web. Free for BAKOM batteries.
What you ask us.
Didn't find your answer? Call or write to us — we'll help you choose and connect it.
When will I receive the battery?
We build batteries by hand to order and do not keep them in stock. After your inquiry we confirm the current lead time and put you in the order queue — the reservation is free and non-binding. We contact you before production starts.
Do I pay a deposit?
No. We build and test the battery, then send the invoice and dispatch the battery once payment has arrived. Smaller batteries go by PPL, heavier ones on a pallet; the shipping cost is stated in the quote. Collection in person is possible by arrangement near Klatovy or near Ostrava.
Will the battery communicate with my inverter?
CAN variants communicate with Victron, Deye, Growatt, GoodWe, MUST, Luxpower and other inverters, and via RS485 with, for example, Voltronic inverters. With a Victron system (Cerbo GX), it is the CAN variants that communicate. Our batteries are low-voltage — they do not work with high-voltage (HV) hybrid inverters. Send us your inverter type and we will check.
Can I charge the battery in winter?
Below +1 °C the BMS blocks charging to protect the cells and allows it again above +4 °C. Discharging is possible down to −22 °C. For unheated spaces there are variants with HEAT heating (suffix H), which warm the cells before charging.
What charging voltage should I set?
12.8 V: absorption 14.1 V, float 13.8 V · 25.6 V: 27.9 / 27.4 V · 51.2 V: 55.8 / 54.7 V · 48 V (15 cells): 52.3 / 51.3 V. The BMS protection voltage (3.56 V per cell) is not a charging target. For 15-cell batteries, do not use profiles for 51.2 V or for lead-acid batteries.
Is the inverter communication cable included?
For 48 V and 51.2 V batteries with BMS+ (RC variants), yes, depending on the configuration ordered. For 12.8 V and 25.6 V packs we supply it at extra cost or make one to measure.
Can I add another battery later?
Variants with BMS+ (BK8K-RC and the 48/51.2 V RC series) can be connected in parallel; up to 16 batteries with the same BMS version can be addressed. Each battery is connected separately to the DC busbar with cables of the same length and cross-section — daisy-chaining power cables from battery to battery is not permitted. For more than two batteries we go through the set-up with you in advance.
What is the difference between the AkuBox and a compression box?
The compression box keeps the cells clamped, which benefits their life especially under high load; it can stand horizontally or vertically. It is an open design, so it belongs in a lockable technical room. The AkuBox is a closed enclosure that protects the battery from damage and unauthorised tampering — made of plastic for 12.8 and 25.6 V. The metal AkuBox BK16A-RC also has a built-in display and an isolator switch.
How many cycles will the battery last?
Packs built from EVE LF280K and MB31 cells last 8,000 cycles until capacity drops to 70 %, 105 Ah packs 4,000 cycles to 80 % (cell manufacturer's data at 25 °C). Actual life depends on temperature, currents and depth of discharge.
How should I store the battery over winter?
If the battery will be out of use for more than a week, switch it off. Store it in a dry place, charged to roughly 40–80 %, and top it up every three months. Never leave it fully discharged.
How can I monitor the battery remotely?
The BAKOM BMS app connects to the battery via Bluetooth. The BAKOM Cloud web portal then keeps your batteries, measurement history and settings in one place — you add a battery to your account with the QR code on its label. More on the App page.
Am I allowed to change the BMS settings?
We set the protection parameters in the workshop according to the battery type. Normal user functions in the BAKOM BMS app do not void the warranty; changing the protection configuration, changing the administrator password or modifying the wiring does.
Interested in the BK36A-C?
Write to us.
Add the quantity, the type of inverter or appliance and your timing. We check that the pack suits your system and send a quote with a delivery date.
- baterie@bakom.czInquiries, orders and technical questions
- Bronislava Baxová
- +420 737 344 853Orders, lead times, invoices and dispatch
- Petr Baxa
- +420 603 552 577Production, wiring of batteries and Deye inverters
- Michal Komenda
- +420 602 564 571Technical matters, off-grid systems and Victron, BAKOM BMS app
- Workshops
- Svrčovec near Klatovy and Krmelín near OstravaVisits and collection by appointment only